3 INSTALLATION AND MODULE MOUNTING
3-3
3.2 Installation
Environment
The programmable controller and I/O modules mounted in it must be used within the installation
environment specified in Table 3-1. To ensure a long-term stable performance of these
hardware products, the user is recommended to use them at normal temperature and normal
humidity (15 to 35°C, 45 to 85%RH). If they are used in a high-temperature and high-humidity
environment or an environment where the temperature fluctuates widely between day and night,
their useful service life will be shortened.
Table 3-1 Installation Environment Specifications
Power supply
voltage
100 to 120 VAC, single phase, 50/60 ±5 Hz for model LWV450;
100 to 120 VAC, single phase, 50/60 ±5 Hz, 100 to 110 VDC for
model LWV460;
100 to 110 VDC for model LWV550
Power supply
voltage range
85 to 132 VAC for model LWV450;
85 to 132 VAC, 80 to 143 VDC for model LWV460;
80 to 143 VDC for model LWV550
Ambient
temperature
During operation, 0 to 55°C; During storage, -20 to 70°C
(Temperature ramp rate: 10°C/hour or less)
Ambient
humidity
During operation, 30 to 90%RH; During storage, 10 to 90%RH
(non-condensing)
Vibration
resistance
Conforming to JIS C0040 standard;
Frequency, 10 to 150 Hz;
Acceleration, 10 m/s
2
;
Directions, X, Y, and Z;
Sweep time, 8 minutes;
Sweep cycles, 20
Shock
resistance
Conforming to JIS C0041 standard;
Peak acceleration, 147 m/s
2
;
Half-sine pulses;
Directions, X, Y, and Z; 3 times in each direction
Ambient air
(cleanliness)
Class 1 million, with no corrosive gases
NOTICE
It may happen that the input voltage of the power supply module is within the
above specifications but it is close to the upper or lower limit. In these cases,
the user is advised to consider the input voltage as being abnormal and ask a
power supply management specialist for inspection of the module.
Summary of Contents for HSC-2100
