D
ETERMINING
IF
A
D
ATA
A
DAPTER
IS
A
SSIGNED
HCXTD840, Issue 1, July 2001
A-11
Determining if a Data Adapter is Assigned
Procedure
To determine if a data adapter is assigned:
1
Press and hold the <DA> key to display a new line
above the key labels. This display tells you if a data
adapter is assigned to the console.
2
Lift your console to see if a wedge-shaped device
(data adapter) is attached underneath and the console
has short legs attached to it. When you first assign a
data adapter, use this test procedure to confirm that
your data adapter is assigned properly. See
Figure A-8
for an example of a display showing data adapter
assignment.
Figure A-8: Displaying data adapter assignment
If a data adapter is assigned to your console, the display
reads DATA ADAPTER = YES.
*** DATT TEST ***
KEY NO. =
RINGING FREQUENCY =
RINGING LEVEL =
RINGING PATTERN =
DATA ADAPTER =
OFF
NORMAL
LINE-LINE (USA)
NO
R-FRQ
R-LEV R-PTN
DA
ROM
LCD
Summary of Contents for HCX5000I
Page 5: ...TABLE OF CONTENTS SELECSET 500A USER S GUIDE vi HCXTD840 Issue 1 July 2001 ...
Page 7: ...LIST OF FIGURES SELECSET 500A USER S GUIDE viii HCXTD840 Issue 1 July 2001 ...
Page 9: ...LIST OF TABLES SELECSET 500A USER GUIDE x HCXTD840 Issue 1 July 2001 ...
Page 185: ...TESTING THE LIQUID CRYSTAL DISPLAY SELECSET 500A USER GUIDE A 14 HCXTD840 Issue 1 July 2001 ...