--- 10 ---
8-4. Tool Retainer
The Model H 25PV is equipped with a slide-type tool retainer. Tools can be attached and detached just by pulling
grip. While pulling grip in direction, insert the tool in the hole of the front cap (Fig.6). Adjust the groove
position by turning the tool and push it in to the end. Lock the tool by returning grip back to the original position.
Make sure it is locked completely by pulling tool in direction (Fig. 7).
Fig. 6
Tool shank
Grip
Front cap
Fig. 7
Lock sleeve
Grip
Fig. 8
8-5. Adjusting Mechanism for Tool Swivel Angle
Sliding the lock sleeve in the direction , turn the grip in the direction as shown in Fig. 8. Then the tip angle of
the tool can be adjusted in eight levels. After adjustment, release the lock sleeve and check for secure locking by
turning the grip.
1
2
1
2
1
2
1
2
Summary of Contents for H 25PV
Page 28: ......
