Hitachi G 14DBL, Handling Instructions Manual

Page: 9 / 240

9
English
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country speci fi c regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling instruction,
to a Hitachi Authorized Service Center.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 90 dB (A).
Measured A-weighted sound pressure level: 79 dB (A).
Uncertainty K : 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Surface grinding:
Vibration emission value
a
h
, AG = 12.2 m/s 2
Uncertainty K = 1.5 m/s
2
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of exposure.
WARNING
○ The vibration emission during actual use of the power
tool can di ff er from the declared total value depending in
the ways in which the tool is used.
○ Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched o ff and when it is running idle in addition to the
trigger time).
NOTE
Due to HITACHI’s continuing program of research and
development, the speci fi cations herein are subject to
change without prior notice.
SPECIFICATIONS
Model
G14DBL G18DBL G18DBAL G18DBVL
Voltage 14.4 V 18 V
Rated speed
9000 min
-1
Auto mode: 5500 min
-1
Transmission mode:
4700 – 9000 min
-1
Auto mode:
5500 min -1
Wheel
Outer dia. 115 mm 125 mm 115 mm 125 mm 115 mm 125 mm 125 mm
Hole dia. 22.23 mm
Thickness 6 mm
Peripheral speed 80 m/s
Wieght* 2.3 kg 2.4 kg
* Weight: According to EPTA-Procedure 01/2003
Table 3
Mode Status Number of Revolutions (min -1 ) Use
Auto
No-load 5500 Light work, Standby state
During operation 9000 Grinding, cutting
Transmission
(G18DBVL)
Dial Settings
1 4700
Grinding stainless steel
Rust or paint removal
2 5500
3 6400
4 7200
Grinding, fi nishing
Rough grinding, cutting
5 8100
6 9000
0000Book̲G14DBL.indb 9 0000Book̲G14DBL.indb 9 2015/04/22 11:56:32 2015/04/22 11:56:32