3-38
Driver and Utility
PCIe Flash Drive FlashMAX2&3 User’s Guide
(3) When the Modify Partition for Device - vgcx dialog box appears, select a
formatting mode in the
Mode Setting
section.
(4) When the Modify Device Configuration dialog box appears, make sure
formatting will be applied to partition“vgcx0”. Then, click
Yes
.
(5) When the Modify Configuration for Partition - vgcx0 dialog box appears,
click
OK
.
After the message indicated above appears, formatting still goes on internally.
During the formatting process, the expected I/O performance cannot be
achieved. Once formatting starts, keep the power turned on for about 20
minutes. (Turning off the power during formatting will not cause any damage.
When the power is turned on, formatting will automatically restart.)
