4 - 20
4-4-1 Checking fi rmware versions
(1) Version check screen display method
1) Attach the battery pack or AC adapter/charger to power the DVD video camera/recorder.
2) Set the power switch to the “DVD” position. Then operate the DVD video camera/recorder while
watching the LCD monitor or view
fi
nder screen.
3) If a DVD is loaded, press the DISC NAVIGATION button to display the thumbnail screen. If no
DVD is loaded, this will not be necessary.
4) Display the version check screen (version display screen) using the following button operation:
Simultaneously press the SLEEP/RESTART, REC and buttons.
(2) Version check screen display clearing method
1) If no DVD is loaded, press the STOP/CANCEL button to restore the normal screen.
If a DVD is loaded, press the STOP/CANCEL button to restore the thumbnail screen. To restore
the normal screen, also press the STOP/CANCEL button or DISC NAVIGATION button.
(3) Details of information version screens
Table 4-4-2 Detail/Version Screens
Troubleshooting > Checking Versions of Firmware and Updating
Fig. 4-4-1 Example of Version Screens
Version
RETURN
Model
:
DZ-xxxxxx
System
:
x.xx
H
Camera
: x.xx H (xx)
Drive (Main) : xxxx. xx. xx. REV
Drive (Core) : xxxx. xx. xx. REV
10355
Item
Display content
Model
Model name
System
System
fi
rmware version number
Camera
Version number of camera microprocessor
fi
rmware, and number of pixels of CCD image
sensor in parentheses ( )
Drive (Main)
Drive main
fi
rmware version number
Drive (Core)
Drive core
fi
rmware version number