-20-
Terminal
Pushing Button
[32]
DC-Speed Control Switch
[40]
Controller Terminal Set
[41]
Housing (A)
Fig. 12
(b) Mount the Pushing Button
[32]
to Housing (A). Confirm that the protrusion of the forward/reverse
changeover lever of the DC-Speed Control Switch
[40]
is inserted into the groove on the Pushing Button
[32]
.
(c) Bend the internal wire under the Controller Terminal Set
[41]
so that it fits in the housing. (See Fig. 12.)
NOTE: Black oxide adhering to the contact point between the terminal and battery or peeled-off
plating may result in higher temperature at the contact point, thereby causing the battery
or Models DS 14DSFL and DS 18DSFL to malfunction. In such case, replace the Controller
Terminal Set
[41] with a new one (Fig. 3).
(d) Set Housing (B) to Housing (A) and secure both sections with the nine Tapping Screw (W/Flange) D3 x 16
(Black)
[26]
.
