-16-
Front Case
[9]
Clutch Dial
[4]
Click Spring
[5]
Nut
[6]
Spring
[7]
Washer (D)
[8]
Notch
2. Reassembly of the clutch unit
(a) Mount Washer (D)
[8]
and the Spring
[7]
onto the Front Case
[9]
. When mounting Washer (D)
[8]
onto the
Front Case
[9]
, align the projection on the Front Case
[9]
with the notch of Washer (D)
[8]
. (See Fig. 4.)
(b) Mount the Nut
[6]
onto the Front Case
[9]
. (See Fig. 5.)
Align register mark (o) on the Nut
[6]
with the register mark on the Front Case
[9]
. Turn the Nut
[6]
about
1-1/2 turns clockwise so that register mark (
∆
) on the Nut
[6]
is aligned with the register mark on the
Front Case
[9]
. Check that the Y surface of the Nut
[6]
is aligned with the Z surface of the Front Case
[9]
.
Fig. 4
Fig. 5
