-19-
Protrusion
Recess
Clutch Dial
[4]
Housing(A)
Recess
Projection
Groove
Projection
Motor Spacer
[24]
Front Case
[9]
Fig. 10
(f) Assemble the Gear Box Ass'y
[3]
and Motor
[33]
.
(See Fig. 10.)
Fit the projection on the Motor Spacer
[24]
into
the recess on the Rear Case
[14]
while ensuring
that the Shift Knob
[38]
is aligned with the positive
side of the Motor
[33]
,
and then turn the Motor
Spacer
[24]
clockwise (as viewed from the rear of
the Motor
[33]
)
until it can turn no further. During
installation, confirm that the pinion is press-fit onto
the shaft of the Motor
[33]
and that Planet Gear
(A) Set
[21]
meshes properly.
4. Installation of the assembly unit in step 3 into Housing (A).(B) Set
(a) Install the assembly reassembled in step (3) into Housing (A).
Note that the projections on the Front Case
[9]
and Motor Spacer
[24]
are engaged in the recesses on
Housing (A), and the projection on Housing (A) is engaged in the groove on the Clutch Dial
[4]
. (See Fig.
11.)
Fig. 11
