Hitachi DH 24PC3, Technical Data And Service Manual

Page: 9 / 47

--- 6 ---
B. Anchor setting (hammering only)
Anchor setting adapter (SDS-plus shank)
Part name
W-1/4 Anchor setting adapter-A
W-5/16 Anchor setting adapter-A
W-3/8 Anchor setting adapter-A
W-3/8 Anchor setting adapter-A
Code No.
302976
302975
303621
302974
Anchor setting bar to permit anchor setting operation with the rotary hammer
Part name
W-1/4 Anchor setting adapter-B
W-5/16 Anchor setting adapter-B
W-3/8 Anchor setting adapter-B
W-3/8 Anchor setting adapter-B
Code No.
302979
302978
303622
302977
Overall length
260
260
160
260
Internal cone type
External cone type
Anchor setting bar
Anchor setting bar for manual anchor setting
Anchor setting adapter
Part name
W-1/4 Anchor setting adapter-A
W-5/16 Anchor setting adapter-A
W-3/8 Anchor setting adapter-A
W-1/2 Anchor setting adapter-A
W-5/8 Anchor setting adapter-A
Code No.
971794
971795
971796
971797
971798
Part name
W-1/4 Anchor setting adapter-B
W-5/16 Anchor setting adapter-B
W-3/8 Anchor setting adapter-B
W-1/2 Anchor setting adapter-B
W-5/8 Anchor setting adapter-B
Internal cone type
External cone type
Code No.
971799
971800
971801
971802
971803
C. Large hole boring (ro hammering)
Center pin, core bit, core bit shank and guide plate
(Guide plate) Center pin Core bit Core bit shank
(SDS-plus shank)
(1) Center pin (Do not use bit with outer diameter of 25 mm (31/32") and 29 mm (1-5/32")
Center pin (A) Core bit (outer diameter) 32, 35, 38 mm (1-1/4", 1-3/8", 1-1/2") Code No. 982684
Center pin (B) Core bit (outer diameter) 45, 50 mm (1-25/32", 2") Code No. 982685
Overall length
260
260
160
260