11
English
10. Driving Screws (rotation only)
Bit No.
Screw Size
Length
No. 2
3–5 mm
25 mm
No. 3
5–8 mm
25 mm
11. Dust cup, Dust collector (B)
Dust cup
Dust collector (B)
Bit
No.
Chuck adapter (D)
(SDS plus shank)
Optional accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
䡬
Drilling anchor holes
䡬
Drilling holes in concrete
䡬
Drilling holes in tile
Rotation only function
䡬
Drilling in steel or wood
(with optional accessories)
䡬
Tightening machine screws, wood screws
(with optional accessories)
Hammering only function
䡬
Light-duty chiselling of concrete, groove digging
and edging.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latches
to remove the battery (see
Figs. 1
and
2
).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery aligning both guide rail of battery
and body. Make sure the battery is fixed firmly.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When the power cord is connected, the charger’s
pilot lamp will blink in red. (At 1-second intervals).
2. Insert the battery into the charger.
Insert the battery into the charger as shown in
Fig.
3
. Make sure the battery is fully seated in the
charger.
3. Charging
When inserting a battery in the charger, charging
will commence and the pilot lamp will light
continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals.) (See
Table 1
)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown
in
Table 1
, according to the condition of the charger
or the rechargeable battery.
01Eng_DH24DVA_WE
11/27/08, 13:36
11
