10.3 Non-data commands
The following are non-data commands:
y
Check Power Mode
y
Device Configuration Freeze Lock
y
Device Configuration Restore
y
Execute Device Diagnostic
y
Flush Cache
y
Flush Cache Ext
y
Idle
y
Idle Immediate
y
Initialize Device Parameters
y
NOP
y
Read Native Max Address
y
Read Native Max Address Ext
y
Read Verify Sector(s)
y
Read Verify Sector(s) Ext
y
Recalibrate
y
Security Erase Prepare
y
Security Freeze Lock
y
Seek
y
Set Features
y
Set Max Address
y
Set Max Address Ext
y
Set MaX LocK command
y
Set MaX Freeze Lock command
y
Set Multiple Mode
y
Sleep
y
SMART Disable Operations
y
SMART Enable/Disable Attribute Autosave
y
SMART Enable Operations
y
SMART Execute Off-line Data Collection
y
SMART Return Status
y
SMART Save Attribute Values
y
SMART Enable/Disable Automatic Off Line
y
Standby
y
Standby Immediate
Execution of these commands involves no data transfer.
1.
The host writes any required parameters to the Features, Sector Count, Sector Number, Cylinder,
and Device/Head Registers.
2.
The host writes the command code to the Command Register.
3.
The device sets BSY=1.
Deskstar 180GXP hard disk drive specifications
100
Summary of Contents for Deskstar 180GXP
