Hitachi D36WF840N Instruction Manual Download Page 67

Page: 67 / 74

remedy

possible cause

problem identification

1. No digital audio. Pressing

the info/recall button on your

handset doesn’t show Digital

audio modes or format in top

right hand corner of screen.

No or poor digital connection
between television and external
equipment

See ‘DVD, CD and LaserDisc
player connection’

Incorrect Decode Mode

Set the Decode Mode to
correct AV (see Decode
Mode set up procedure)

Decode Mode is set for wrong
AV (you will have the correct
picture from your external
equipment but no sound)

Set the Decode Mode to
Digital or Auto (see ‘Digital
Audio Status - Decode
Mode’ set up procedure)

Television is set to the wrong AV
(you will have the wrong picture
or no picture at all)

Use the Manual Setup
procedure to set the AV
correctly, or use the AV key
to cycle through the Audio
Visual options.

Player is not playing because it
has been switched off or placed
in ‘Pause’ mode.

Refer to external equipment's
instructions

Invalid or damaged disc has
been placed in player.

Refer to external equipment
instructions. Is the disc
compatible with the external
equipment you are using?

Signal options not supported by
television.

See Digital Audio Status for list
of modes available.

Digital audio out has not been
enabled on player.

Refer to external equipment
instructions on how to enable
the digital audio output.

2. Digital audio works but

only PCM mode is available

even when playing a DTS,

Dolby Digital or MPEG

encoded disc.

Your external equipment has not
been configured to output a
digital bitstream, does not
support DTS, Dolby Digital or
MPEG output, or the correct
format is not enabled on the
external equipment.

3. No sound even at maximum

volume, although the correct

picture can be seen.

Amplifiers muted or set to
‘NONE’.

See the Speaker Setup menu.

Headphones have been inserted
into front control panel.

Remove headphones.

4. Picture is OK, but digital

audio is intermittent.

Poor connections.

Check your coaxial/optical
connections.

Faulty disc.

Try an alternative disc.

Faulty external equipment.

Try alternative equipment or
contact your equipment's
supplier.

5. Picture and digital audio are

intermittent.

Has a scart lead connection
been made between TV and
external equipment?

Check quality of connection.

Faulty external equipment.

Try alternative equipment or
contact your equipment's
supplier.

External/internal speaker switch
is in the incorrect position.

Place in correct position to use
appropriate speakers.

You have not selected a DTS,
Dolby Digital or MPEG track from
the DVD title menu

Refer to title menu on disc to
set audio format

Laserdisc with Dolby Digital RF
signal cannot be detected

Fit adaptor as described in
‘DVD, CD and LaserDisc
player connection’

Refer to external equipment
instructions for compatibility.

INFORMA

TION

Digital Audio

rouble Shooting Guide

Summary of Contents for D36WF840N











































































Search results

Summary of Contents for D36WF840N

Reviews:

Related manuals for D36WF840N

Brands by name

Popular brands

Hitachi D36WF840N, Instruction Manual

Search results

Summary of Contents for D36WF840N

Reviews:

Related manuals for D36WF840N

Brands by name

Popular brands