English
33
NOTE
○
Make sure the facing of the application tool is correct.
○
Make sure the application tool is properly set on the protrusion of the
attachment ring.
(1) Pull the lever up. There will be some resistance, but make sure the lever
is pulled until it is parallel with the main unit.
(2) Pull and turn the guide sleeve until “ ” is aligned with the “
” mark.
(3) Pull out the tool shaft.
(4) Attach the application tool to the attachment ring, making sure the tool’s
hole is
fi
tted to the ring’s protrusion. The angle of attachment for the
application tool can be set in 30° increments.
(5) Insert the tool shaft.
(6) Align the guide sleeve’s “
” mark to the “ ” position.
(7) Push down the lever.
(8) Align the holes when sticking the sanding paper to the pad.
000Book̲CV14DBL̲ChS.indb 33
000Book̲CV14DBL̲ChS.indb 33
2017/04/17 16:38:12
2017/04/17 16:38:12
