English
24
6. Dust particles such as silica or asbestos are hazardous to
your health. When working with materials containing these
components, take appropriate dust-proo
fi
ng measures.
7. Working with metal can cause sparks. Make sure there are no
fl
ammable and combustible materials in the vicinity and that they
are stored in a safe location.
8. Do not allow foreign matter to enter the hole for connecting the
rechargeable battery.
9. Never disassemble the rechargeable battery and charger.
10. Never short-circuit the rechargeable battery. Shortcircuiting the
battery will cause a great electric current and overheat. It results
in burn or damage to the battery.
11. Do not dispose of the battery in
fi
re. If the battery is burnt, it may
explode.
12. Bring the battery to the shop from which it was purchased as soon
as the post-charging battery life becomes too short for practical
use. Do not dispose of the exhausted battery.
13. Do not insert object into the air ventilation slots of the charger.
Inserting metal objects or in
fl
ammables into the charger air
ventilation slots will result in electrical shock hazard or damaged
charger.
14. After use for continuous cutting or grinding works, rest the unit
for 15 minutes or so when replacing the battery. The temperature
of the motor, switch, etc., will rise if the work is started again
immediately after battery replacement, eventually resulting in
burnout.
15. The motor may stop in the event the tool is overloaded. In this
should occur, release the tool’s switch and eliminate the cause of
the overload.
16. The use of the battery in a cold condition (below 0 degree
Centigrade) can sometimes result in the weakened tightening
torque and reduced amount of work. This, however, is a temporary
phenomenon, and returns to normal when the battery warms up.
17. Do not look directly into the light. Such actions could result in eye
injury.
18. Do not touch the application tool, its attachment area or other
metal surfaces immediately after use as they will be hot. Doing so
may result in burns or injury.
The metal is hot and can easily burn your skin.
19. Make sure that there is no one below when operating the tool
in high locations. Dropping the tool or materials may result in
accident or injury.
20. Never apply any unreasonable force to the application tool when
working. Doing so may break the application tool or damage the
motor.
000Book̲CV14DBL̲ChS.indb 24
000Book̲CV14DBL̲ChS.indb 24
2017/04/17 16:38:11
2017/04/17 16:38:11
