25
Sound and picture controls
Sound set-up
Storing new sound settings
1
Press the green button to select the Sound menu.
________________________________________________________________________
2
Select the required option with the cursor buttons (up or down).
• Audio - Standard setting is STEREO. If there is noise, or the
transmission is weak, select MONO to improve sound quality.
• Sound channel - In case of a bilingual transmission select the sound
channel you require.
• Tone - See the section "Sound controls".
• Separation - To turn on or off the wider sound reproduction.
________________________________________________________________________
3
If you want to store the changed values in the memory, press the OK
button.
Adjustments in the options Audio, Sound channel and Tone only affect
the selected programme channel. Separation and Equaliser affect all
programme channels.
Adjusting bass and treble
1
Press the green button twice.
________________________________________________________________________
2
Use the cursor buttons to adjust sound tone.
The lowest tones are adjusted in the the left columns and the higher
tones in the right columns. In each column, when the bar is below the
centre line, the selected tone is de-emphasized. The higher above the
centre line you move the bar, the more emphasis is given to that
particular tone.
________________________________________________________________________
3
If you want to store the changed values in the memory, press the OK
button.
Sound settings
1
Press the green button to select the Sound menu.
________________________________________________________________________
2
Press the red button to show the Sound settings menu.
________________________________________________________________________
3
Use the cursor buttons to adjust start-up volume or balance.
________________________________________________________________________
4
If you want to store the changed values in the memory, press the OK
button.
These adjustments affect all programme channels.
STEREO
PREFERRED
SOUND A
Sound
Audio
Sound channel
Tone
Separation
Store »
Sound
settings Equaliser Go back
100Hz 330Hz 1kHz 3kHz 10kHz
+
-
Equaliser
Go back Store »
Sound settings
Starting volume
Balance
Go back Store »
3P58 83041010-GB
