Hitachi CP-X807W, Service Manual

Page: 41 / 117

41
CP-X807(EDX50WL)
7. Wiring diagram
Wiring diagram 1
Wiring of the circuit power supply
Wiring of the circuit power supply main board
(1) Connect the TSW. Make sure to confirm the seal (based on the diagram below) when attaching the TSW.
(2) Connect the CNPW1 and CNPW2, Attach the FEB1.
(3) Connect the CNAC, Attach the FEB2 and FEB3 to the CNAC.
Attach the FEB2 and FEB3 (ferrite core) to CNAC.
Make sure to completely lock the hook when attaching the FEB2 and FEB3.
Area of Importance
Area of Importance
Area of Importance
Make sure to completely lock the hook when connecting
the CNAC (as it can not be confirmed whether they are
securely connected in later processes).
Make sure to securely connect the TSW, CNPW1 and CNPW2 to the
circuit power supply (as it cannot be confirmed whether they are securely
connected in later processes).
Attach the FEB1(ferrite core) to CNPW2 and CNPW1.
Make sure to completely lock the hook when attaching the FEB1.
Make sure to confirm the print of the TSW.
Make sure that cables are bound.
The operations with this symbol have
implications with laws/standards.
It is possible to be in violation of these
laws/standards in the case that these
operations are not carried out according
to the instructions. Assemble according
to the operation instructions.
Confirm that the print indicatos.
Seal
Area of Importance