Hitachi CP-X205 Network Manual Download

Page: 11 / 35

Configuring and Controlling the Projector via a Web Browser

Alert Settings

Displays and configures failure & warning alert settings.

Alert Item

Description

Cover Error

The lamp cover has not been properly fixed.

Fan Error

The cooling fan is not operating.

Lamp Error

The lamp does not light, and there is a possibility that interior

portion has become heated.

Temp Error

There is a possibility that the interior portion has become

heated.

Air Flow Error

The internal temperature is rising.

Lamp Time Error

Lamp time over.

Cold Error

There is a possibility that the interior portion has become

overcooled.

Filter Error

Filter time over.

Other Error

Other error.

If displaying this error, please contact your dealer.

Schedule Execution

Error

Schedule Execution error. (



)

Lamp Time Alarm

Lamp time over Alarm Time setting.

Filter Time Alarm

Filter time over Alarm Time setting.

Transition Detector

Alarm

Transition Detector Alarm. (



"OPTION menu" section of the

User's Manual - Operating Guide

)

“CHANGE THE LAMP” is

displayed.

“CHANGE THE LAMP” is displayed.

Cold Start

The power switch is turned on.

(Off → standby mode)

Authentication Failure

The SNMP access is detected from the invalid SNMP

community.

Refer to "

Troubleshooting" section of the User's Manual - Operating Guide

for

further detailed explanation of Error except Other Error and Schedule Execution

Error.

Summary of Contents for CP-X205




































Search results

Summary of Contents for CP-X205

Reviews:

Related manuals for CP-X205

Brands by name

Popular brands

Hitachi CP-X205, Network Manual

Search results

Summary of Contents for CP-X205

Reviews:

Related manuals for CP-X205

Brands by name

Popular brands