background image

10

Setting up

Connecting with your devices

Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of the device. 
Consult your dealer when the required accessory did not come with the product or 
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform 
the connection, according to the following instructions. Refer to the figures in 
subsequent pages.
Before connecting the projector to a network system, be sure to read 

Network 

Guide

 too.

Use only the appropriate accessories.

 Otherwise it could 

cause a fire or damage the projector and devices. 
•  Use only the accessories specified or recommended by the projector’s 

manufacturer. It may be regulated under some standard.

•  Neither disassemble nor modify the projector and the accessories.
•  Do not use the damaged accessory. Be careful not to damage the accessories. 

Route a cable so that it is neither stepped on nor pinched out.

WARNING

For a cable with a core at only one end, connect the end 

with the core to the projector.

 That may be required by EMI regulations.

CAUTION

• Do not turn on or off the projector while connected to a device in 

operation, unless that is directed in the manual of the device. Otherwise it may 
cause malfunction in the device or projector.
• The function of some input ports can be selected according to your usage 
requirements. Check the reference page indicated beside each port in the 
following illustration.
• Be careful not to mistakenly connect a connector to a wrong port. Otherwise it 
may cause malfunction in the device or projector.
-  When connecting a connector to a port, make sure that the shape of the 

connector fits the port.

-  Tighten the screws to connect a connector equipped with screws to a port.
-  Use the cables with straight plugs, not L-shaped ones, as the input ports of 

the projector are recessed.

NOTE

(continued on next page)

Summary of Contents for CP-WX3030WN























































































































Reviews: