48
OSD Menu description
Edge blend
The function of Edge blend is applied in multiple projectors that are projecting at the same screen
simultaneously to adjust the uniformity of the images on the screen.
#
Status
Press ENTER to select ON or OFF. The function must be set to ON in order to enable the
function of Edge blend. If the function is set to OFF, the function of Edge blend is disabled.
#
White Level
%
$¤¥ %J>>
the projected image.
K>> >L * /
Q
>>% X >
>% >
on the OSD.
#
Black Level
& % % @
vs the overlap zone. It increase the black level to the brightness level of the overlap black.
It is to adjust the black level of the Top, Bottom, Left, Right direction on the projected
images.
It can be set to adjust the primary color of the projector. For instance, select ALL is to
adjust the primary color of Red, Greed, and Blue. Or it can be set to adjust the Red, Green
and Blue independently.
"$QY ZX
"$QY
Image 1
Image 2
A
B
C
D
White Level Lines
Image 1
Image 2
A
B
C
D
White Level Lines
for black level adjustment a black
image needs to be connected
on the 2 projectors. Zone B will
have the sum of the blacks of the
2 projectors. Set the adjustment
line of the black level to the
position where the non active
DMD's of the right projector
ends. Set the adjustment line of
the black level to the position
where the non active DMD's of
the left projector ends. Adjust
black level of projector A to
match the black level with zone
B. Adjust the projector C to
match the black level with zone
B.
Blend along
corners
#
Reset
The function can reset the Edge blend settings on the projector. It will restore to the
images to the default that is without any Edge blend functions enabled.