Hitachi CP-SX1350W, Service Manual

Page: 35 / 78

35
CP-SX1350(P5SX+)
4. Wiring of the bottom case when the exhaust fan holder is mounted to it.
A84
Right speaker
#3055
Attach the leads to the exhaust fan as per the assembly diagram.
Pass the exhaust fan leads through the notch in the duct.
Pass the TSW leads through the notch in the ballast holder
.
Before attaching the exhaust fan duct, send the TSW leads from the side behind the duct, install the TSW first then the fan duct. Surplus leads cannot be left inside the duct, so pass them through the side of the ballast holder
.
V
erify the type of TSW
, and install it so that stamped
designation is visible. (YS1
1A120A)
Push the TSW (lamp temperature switch) into its fitting until a click can be heard.
TSW
Wiring diagram 5