Hitachi CP-RX80 - XGA LCD Projector Operating Manual Download

Page: 75 / 95

First of all

Entries and graphical symbols explanation

The following entries and graphical symbols are used for the manuals and the
product as follows, for safety purpose. Please know their meanings beforehand,
and heed them.

Important safety instruction

The followings are important instructions for safely using the product. Be sure to
follow them always when handling the product.

WARNING

This entry warns of a risk of serious personal injury or even death.

CAUTION

This entry warns of a risk of personal injury or physical damage.

NOTICE

This entry notices of fear of causing trouble.

WARNING

Never use the product in or after an abnormality (ex. giving

off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an
abnormality should occur, unplug the projector urgently.

Situate the product away from children and pets.

Do not use the product when there is fear of a thunderbolt.

Unplug the projector from the power outlet if the projector is not used for the

time being.

Do not open or remove any portion of the product, unless the manuals direct

it. For internal maintenance, leave it to your dealer or their service personnel.

Use only the accessories speciﬁ ed or recommended by the manufacturer.

Modify neither the projector nor accessories.

Let neither any things nor any liquids enter to the inside of the product.

Do not wet the product.

Apply neither a shock nor pressure to this product.

- Do not place the product on an unstable place such as the uneven surface or

the leaned table.

- Do not place the product unstably. Place the projector so that it (even the lens

part installed) does not protrude from the surface where the projector is placed
on.

- Remove all the attachments including the power cord and cables, from the

projector when carrying the projector.

Do not look into the lens and the openings on the projector, while the lamp is

on.

Do not approach the lamp cover and the exhaust vents, while the projection

lamp is on. Also after the lamp goes out, do not approach them for a while, since
too hot.

Summary of Contents for CP-RX80 - XGA LCD Projector
































































































Search results

Summary of Contents for CP-RX80 - XGA LCD Projector

Reviews:

Related manuals for CP-RX80 - XGA LCD Projector

Brands by name

Popular brands

Hitachi CP-RX80 - XGA LCD Projector, Operating Manual

Search results

Summary of Contents for CP-RX80 - XGA LCD Projector

Reviews:

Related manuals for CP-RX80 - XGA LCD Projector

Brands by name

Popular brands