Hitachi CP-DX250 guide, Service Manual

Page: 21 / 65

20
6. Click “Save” to save data into the assigned file name. Turn off projector.
<Note :> Tool overview:
ADC calibrated
data in projector
Data Area (will
show value after
read or load data)
Lamp Hour in
projector:
Lamp1&2: the
current lamp
hours.
Factory1&2: the
cumulated
turned-on hours
CW delay
calibrated data
in projector
Serial Number
in projector
sRGB calibrated
data in projector
6-1. Click “Save” icon.
6-2. This window will
pop out, and it shows
the file saving folder.
6-3. Enter file name
here.
6-4. Click “Save” to
save data.