background image

 

 

9

Using this Display Safely 

Common Safety Precautions 

Please read carefully and make sure you fully understand the following safety 
precautions: 

• 

Operations should be done according to instructions and procedures described in this 
manual. 

• 

Make sure to heed all warnings displayed on the device and manual. Neglecting to do 
so may result in fire or damage the device. 

Symbols 

Safety notifications are presented as shown below. These are indicated by “Warning” and 

“Caution” in combination with a caution symbol (graphic symbol).    Additionally, details are 

depicted within the graphic symbols. 

 

Warning

 

This symbol is used to indicate a hazard that may result in death or grave 
injury. 

 

Caution

 

This symbol is used to indicate a hazard that may result in minor injury 
or significant damage to the product 

 

[ Notice example 1]  Shock 
Caution 

This (

Ì

) symbol indicates that caution should be taken and within the 

triangle (

Ì

) is a picture depicting “Shock caution”. 

 

[Notice Example 2] 
Disassembly Prohibited   

In the ( 

[

 ) barred circle is an action that must not be done and the 

picture in this ( 

[

 ) one depicts “Disassembly Prohibited”. 

 

[Notice Example 3]  Unplug 
power Cord from Socket 

In the (

z

) symbol is an action that should be taken. This (

z

) one is a 

picture depicting “ Unplug Power Cord from Socket’ and other 
mandatory actions. 

Summary of Contents for CML153XW































Reviews: