21
Detaching LCD Monitor from Its Stand
1. Remove the rear panel
from the monitor. (see Fig. 1-2)
2. Unscrew screws of the hinge bracket
3. Remove the stand from LCD monitor
Figure 1-2
Interface for Arm Applications
Before installing to mounting device, please
refer to Fig.1-2.
The rear of this LCD display has four
integrated 4 mm, 0.7 pitches threaded nuts,
as well as four 5 mm access holes in the
plastic covering as illustrated in Figure 1-3.
These specifications meet the
VESA Flat
Panel Monitor Physical Mounting
Interface Standard
(paragraphs 2.1 and
2.1.3, version 1, dated 13 November 1997).
Figure 1-3
Connecting the Display to your Computer
1. Power off your computer.
2. Connect one end of the signal cable to
the LCD Monitor's VGA port. (See Fig.
1-4)
3. Connect the other end of the signal
cable to the VGA port on your PC.
4. Make sure both connections are secure.
Figure 1-4
Attention
This device must be connected to an off-the-shelf video cable in order to
