23
Connecting the AC Power
1. Connect the power cord to the AC adapter.
(See Fig. 1-5)
2. Connect the AC adapter's DC output
connector to the DC Power Jack of the
monitor.
3. Connect the power cord to an AC power
source.
Figure 1-5
Warning
We recommand to install a "Surge Protector" device between the AC
Adapter and the electrical wall outlet for adding protection against power
surges to prevent the effects of sudden voltage variations from reaching
the LCD Monitor. Sudden power surges may damage your monitor.
Connecting the Audio Cable
1. Connect the audio cable to the " LINE OUT
" jack on your PC's audio card or to the
front panel's “AUDIO OUT” jack of your CD
ROM drive. (See Fig. 1-6)
2. Connect the other end of the audio cable
to the LCD Monitor's " LINE IN " jack.
Figure 1-6
Setting Up the LCD Monitor
1. Make sure the AC Adapter is connected to the LCD Monitor.
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management
guidelines. The VESA DPMS provides four power saving modes through detecting a
horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and
the power LED indicator will light yellow.
