l
Color Balance Adjustment
[ +] [
+
While the red, green or blue
are lit, you can adjust each color by [+] [
button. The LED will flash if it has reached its limit.
. . .
makes the selected color stronger.
makes the selected color weaker.
Press the store button to store your settings, after adjustment. It will be stored to the
color balance No.3 and it can be selected anytime afterwards.
(refer to “Store
Button”)
When any button other than color adjustment buttons are pressed, or when there is
no key input for
seconds, the color adjustment mode is cancelled.
q
10 seconds after finishing adjustment, the contrast mode is selected automatically, but
the adjusted color settings are not stored without pressing the store button.
Color Reset
(in the color selection mode)
When you want to cancel the currently adjusting, not stored, color balance and recall
the previously stored user color data, press
and buttons at the same time
during the color selection mode.
(While the
of and one of
buttons remain lit.)
The picture color balance will be changed to the formerly saved color balance, and you
can restart the adjustment.
User Data Clear
der Anwenderdaten
(at the power ON only)
(beim Einschalten der Stromversorgung)
+
l
Reset to the original standard settings.
When the power switch is turned ON while pressing the button and button
together, all user settings other than brightness and contrast are deleted.
The original standard setting will still remain.
l
zur orginalen
Beim Einschalten des
und gleichzeitigem
der
und [
Tasten, werden bis auf Helligkeit und kontrast
Anwenderdaten
Die Orginaleinstellung wird
18
