4. Power On
Turn the Power Switch of the monitor on first, then the computer.
If the picture is mute, set “Sync. Signal Termination Switch” to
position. Then
the picture may become proper.
(Only when the “BNC” position is selected with “Signal Input Selection Switch” and
termination is selected with “Sync. Signal Termination Switch”.)
Microprocessor-based preset functions can store 31 sets of geometry settings including the
standard settings. 7 sets are preset at factory, 24sets are available to users.
The following industrial standard settings have been preprogrammed by the factory.
305X230 mm
6
APPLE 1152X
870 -75Hz
100.00 MHz
68.68
305X230 mm
7
CAD
1280X 1024 74Hz
135.00 MHz
78.86
290X230 mm
1.
Input signals with approximately the same frequencies may be regarded as the same
signal.
2.
The following horizontal timing conditions are recommended.
Horizontal front porch should be more than
Horizontal sync. width should be more than
Horizontal back porch should be more than
Horizontal blanking width should be more than
3.
The following vertical timing conditions are recommended.
Vertical blanking width should be more than
Vertical back porch should be more than
