Hitachi CL2843S, Instruction Manual

Page: 12 / 18

ENGLISH - 44 -
is used. In RGB and SVHS modes the Picture Mode can be 4:3,
16:9 (Auto mode is not available.).
When the menu appears on screen, picture mode will auto-
matically change to its default tube mode (4:3 or 16:9) but it
will turned to its stored mode when the menu disappears.
To Store the Settings
• Press “ ” or “ ” button on STORE option to store Picture
menu settings except Picture Mode.
Feature Menu
• To enter the Feature menu directly, press the “ YELLOW ”
button, or
• Press " " button, now you are in Main menu. In the Main
menu, select FEATURE using “ “ or “ ” button. Then enter
the Feature menu pressing “ ” or “ ” button.
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be the first
selected option. Use “ ” or “ ” button to change the Sleep
Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00,
1:15:00, 1:30:00, 1:45:00 and 2:00:00 .
It is displayed on the upper right of the screen. If sleep timer is
activated it is displayed with the TV status and erased with it
after 3 seconds.
If there is left only one minute of the down counting of the timer,
it is displayed automatically on the upper right of the screen,
and stayed there until finishing. Then TV goes automatically to
stand-by.
Child Lock
You can use this feature to prevent children turning on TV or
changing programs or adjustments etc. without remote con-
trol.
The
CHILD LOCK feature can be set by “ ” or “ ” button to
either ON or OFF . When OFF is selected, there will be no differ-
ence in the operation of your TV. When ON is selected, the TV
can only be controlled by the remote control handset. In this
case, the front panel buttons (except the Switch On/Off button)
will not work.
Selecting Menu Language
Menu language can be chosen by pressing “ ” or “ ” button
on LANGUAGE item.
AV-2 OUTPUT
From AV-2 OUTPUT , either TV or AV-1 can be given. TV or
AV-1 can be chosen by pressing “ ” or “ ” button on " AV-2
OUTPUT ".
To Store Settings
In Feature menu all settings are stored automatically.
Install Menu
• To enter the Install menu directly, press the BLUE button, or
• Press " " button, now you are in Main menu. In the Main
menu, select “ INSTALL. ” using “ “ or “ ” button. Then enter
the Install menu pressing “ ” or “ ” button.
Selecting Programme
To select programme number, you can use “ ” or “ ” button,
Digit Buttons or The Double Digit button with digit buttons.
03-ENG-(CL2843S)-2872H-AV-3040-AK37-ST1P-VST.p65 26.06.2003, 11:42 44