Hitachi CL2843S, Instruction Manual

Page: 10 / 18

ENGLISH - 42 -
In case of bilingual broadcast (Dual Sound), you can select
original or dubbed language using mode option.
Setting AVL
Automatic Volume Limiting (AVL) function normalises sound
to obtain fixed output level between programs, having different
sound levels. Pressing “ ” or “ ” button will turn on and off
this feature.
Setting Effect
You can use this feature to switch the sound effect on and off.
Pressing “ ” or “ ” button will turn on and off this feature. If
the current sound system is MONO and the sound effect is set
ON , then the sound will be heard as if it is STEREO . If the cur-
rent sound system is STEREO , switching this effect on will
make the sound deeper. Switching it off will make no change
in MONO and STEREO .
Equalizer
To enter Equalizer sub-menu, select Equalizer using “ “ or “ ”
button, then enter Equalizer menu pressing “ ” or “ ” button.
In MODE item there are five predefined and one user defined
options. These are USER, CLASSIC, JAZZ, ROCK, POP and
FLAT . The predefined options can not be changed by the user.
If you change one of the frequency values of the predefined
options, the MODE is switched automatically to USER option.
The USER option may be adjusted by the user.
The 5 items below the MODE are available to adjust the sound
settings in 5 frequency values: 120 Hz, 500 Hz, 1.5 kHz, 5 kHz
and 10 kHz. To change the values of 5 frequency options,
select one of the options by “ “ or “ ” button, and then press
“ ” to increase the value, or “ ” to decrease the value. In mid
position, cursor is displayed with the two reciprocal arrows.
To store the Equalizer settings, press “ ” or “ ” button on
“ STORE ” option.
During the store process all the items are stored, moreover,
the USER mode information would not be lost. In other words,
when the user mode is selected again, after storing the MODE
with one of the predefined options, the user definde frequency
values would be set.
To Change Headphone Sound Settings
Pressing “ ” or “ ” button on HEADPHONE , enter the Head-
phone menu. This is a sub-menu of Sound menu, and all
options in this menu are working as the same in the Sound
menu.
Setting Headphone Volume
• As you enter the Headphone sound menu, Volume will be
the first selected option.
• Press “ ” button to increase volume.
• Press “ ” button to decrease volume.
Setting Headphone Balance
• When balance control is in mid position, the cursor is dis-
played with the two reciprocal arrows.
• Using “ “ or “ ” button select Balance.
• Press “ ” button to change balance right-wards.
• Press “ ” button to change balance left-wards.
Setting Headphone Mode
• Using “ “ or “ ” button select Mode.
Pressing “ ” or “ ” button will change the current sound
mode. (e.g.: If the current sound mode is stereo, it will be ste-
reo or visa versa).
In case of bilingual broadcast, you can select original or
dubbed language again using mode menu. So when some-
body listens to the original language from the loudspeakers,
somebody else can listen to the dubbed language from head-
phone.
03-ENG-(CL2843S)-2872H-AV-3040-AK37-ST1P-VST.p65 26.06.2003, 11:42 42