background image

-1-

  Shrub shear blade

  Grass shear blade

Crank holder

Crank cam (for shrubs)

Blade case

Blade

Blade cover

Crank holder

Crank cam (for grass)

Blade

x

 UC 10SFL

x

 BCL 1015

This product performs both shrub shearing and grass shearing
functions.

This excellent product can accommodate a shrub shear blade or a grass shear blade in its main body.
The shrub shear blade can be attached to the main body to trim hedges and prune garden trees.
The grass shear blade can be attached to the main body to mow lawns and is particularly effective in
edging lawns near stones or walls.

        A 10.8 V lithium-ion battery (Model BCL1015) is included.

The newly developed Type BCL 1015 Lithium-ion Battery (10.8 V, 1.5 Ah) can be fully charged by the
Model UC 10SFL Charger in about 40 minutes.
The Type BCL 1015 is equipped with an overdischarge protection circuit, overload protection circuit, battery
overheat protection circuit and voltage monitoring circuit for each cell to prevent shorter battery life due to
overdischarge (overuse) or overcharge (excessive charging). This battery is safe thanks to these protection
circuits.

  Precautions on using the Type BCL 1015 Lithium-ion Battery

The Type BCL 1015 Lithium-ion Battery is equipped with a protective function that automatically stops
output to prolong battery life. The motor may stop automatically in any of cases (1), (2) and (3) below, even
with the switch being held down during operation. This is because the protective function is activated. It is
not faulty.

Protective function

Cause of trouble

Countermeasure

(1)

Overdischarge
protection circuit

Battery voltage is decreased to about 6 V.

Charge the battery immediately
in such case.

(2)

Overload
protection circuit

Heavy-duty work

Release the switch and eliminate
the cause of the overload problem.

(3)

Battery overheat
protection circuit

Continuous operation
or heavy-duty work

Remove the battery from the tool
and cool it down.

SELLING POINTS

The shrub shear blade and grass shear blade come
standard with the Model CH 10DL (CG).
The grass shear blade is optional for the Model CH 10DL.

The shrub shear blade is optional for the Model CG 10DL.

Summary of Contents for CG 10DL


























Reviews: