Hitachi C28W460N, Instruction Manual

Page: 17 / 24

- 16 -
Selecting Frequency
• When you select “ FREQUENCY ”, the display of the
Tuning menu will be as below :
The frequency value is,
• 040 - 900 MHz for band VHF1 - VHF3 - UHF.
FREQUENCY can be changed by “ “ or “ ” button,
by the Digit buttons or by the Double Digit button
with digit buttons.
The decimal value in frequency can not be changed by
the digit buttons, it can be changed only by the “
“ or
“ ”button. The value can be “00”, “25”, “50” and “75”.
Selecting Search
To start the search process, press “ ” button for for-
ward search or “ ” button for backward search.
SEARCH item bar blinks during search process, up to
the process is stopped or signal is found. To stop the
search process “
“ or “ ” button must be pressed
again.
To Store Settings
Press “ “ or “ ” button on STORE option to store
Install menu settings.
Program Menu
• To enter Program menu directly, press the “ i ” button,
or
• Press “ MENU ” button, now you are in MENU . In the
MENU , select “ PROGRAM ” using “ ” or “ ” button.
Then enter the Program menu pressing “ “ or “ ”
button.
6281'
3,&785(
)($785(
,167$//
352*5$0
Moving cursor to four direction you can reach 30
programmes in the same page. By scrolling the pages
up or down by pressing the navigation buttons you can
select all the programmes in TV mode (except the AV
mode).
In menus, “ ” or “ ” buttons are working like "Direc-
tion Up" and "Direction Down".
By cursor action, programme selection is done auto-
matically. Selected programme is displayed with “ HIGH-
LIGHTED ” characters.
Programme Number is between 00 and 99. Programme
Name has a name string with 4 characters. After
autostore process the Programme Names are set to:
• Frequency search "
PR01 " (programme number),
• Channel search " C01 " or " S01 " (band and channel
number), as default.
At the bottom of the menu there is a programme sort
functions section. Each function is activated by color
button. NAME allows changing the programme name.
By DELETE you can delete programmes that you de-
cided. INSERT section is for inserting programmes into
another programme spaces. By selecting AUTOSTORE
section, Autostore menu will be available.
To change the name of a decided programme, that
programme is selected and pressed to the RED button
( NAME ). First letter of the selected NAME is displayed
with HIGHLIGHTED character. To change that letter “ ”
or “ ” button can be used, and to select the other
letters, “
“ or “ ” button can be used. If the cursor
is at the last letter of the Programme Name, pressing
“
” button moves the cursor at the beginning. On the
contrary, if the cursor is at the beginning of the
Programme Name, pressing “
” button moves the cur-
sor at the end.
&
&
&
&
&
&
$8726725(
,16(57
'(/(7(
1$0(
At the bottom of the menu there is a programme sort
functions section. Each function is activated by coloured
button (seen above). Name allows changing the pro-
gramme name. By Delete you can delete programmes
that you do not require. Insert section is for inserting
programmes into another programme spaces. By se-
lecting Autostore section, Autostore menu will be avail-
able.
Name:
To change the name of a programme, select the
programme and then press the RED (Name) button. The
first letter begins to blink on the selected name. To
change that letter “ ” or “ ” button can be used, and to
select the other letters, “ ” or “ ” button can be used.
If the cursor is at the last letter of the Programme Name,
pressing “ ” button moves the cursor at the beginning.
On the contrary, if the cursor is at the beginning of the
2853W-1244UK-ENG-ST7P-AK45-PLL-FS-CLED-50051552.p65 13.07.2004, 10:54 16