Hitachi C28W460N, Instruction Manual

Page: 11 / 24

- 10 -
Menu System
Your TV has been designed with a menu system, to
provide an easy manipulation of a multi-function sys-
tem. The TV is controlled by choosing the commands,
which are displayed on the screen.
Press the “
MENU ” button. The MENU will be displayed
in the middle on the screen.
All the selected items in this menu system is indicated
with HIGHLIGHTED characters and with an arrow on
the leftside of items.
6281'
3,&785(
)($785(
,167$//
352*5$0
To select a sub-menu use “ ” or “ ” button, and press
“
“ or “ ” button. Each option can also be selected
with the coloured button and “ ” button on the remote
control.
MENU
The menu system is described below.
The short way in order to enter the menus, press :
“
MENU ” Button, Menu.
Red “ ” Button, Sound Menu.
Green “ ” Button, Picture Menu.
Yellow “ F ” Button, Feature Menu.
Blue “ ” Button, Install Menu.
“ ” Button, Program Menu.
Menu button has two functions; first is opening or clos-
ing the “ MENU ”, and the second is closing the sub-
menu and then opening its parent menu.
Sound Menu
To change sound settings
• Enter the Sound Menu directly, pressing the Red “ ”
button or,
• As you enter the MENU , sound will be the first se-
lected option. In the MENU , select SOUND using “ ”
or “ ” button, then enter the sound menu pressing
“
“ or “ ” button.
Setting Volume
As you enter the sound menu, Volume will be the first
selected option.
• Press “
” button to increase volume.
• Press “ ” button to decrease volume.
Or you can directly change the volume settings using
“
” (to increase) or “ ” (to decrease) button.
Setting Balance
It allows adjusting the distribution between the left and
right speakers.
• Using “ ” or “ ” button select Balance.
• Press “
” button to change balance to the right.
• Press “ ” button to change balance to the left.
When balance control is in mid position, the cursor is
displayed with the two reciprocal arrows.
Selecting Sound Mode
• Using “ ” or “ ” button select Mode.
• Press “
“ or “ ” button to change Mode.
You can select MONO , STEREO, DUAL-I or DUAL-II
mode, only if the selected channel supports that mode.
You can also change sound mode directly pressing “
I-
II ” button on your remote control.
Setting Effect
You can use this feature to switch ON and OFF sound
effect. Pressing “ “ or “ ” button will turn on or off
this feature. If the current sound system is Mono and
the sound effect is set ON, then the sound will be heard
2853W-1244UK-ENG-ST7P-AK45-PLL-FS-CLED-50051552.p65 13.07.2004, 10:54 10