Hitachi BX35A - DZ Camcorder - 680 KP Instruction Manual Download Page 21

Page: 21 / 166

English

ATTACHING LENS CAP

Attach the shorter end of lens cap string to
the lens cap.

Attach the longer end of lens cap string to the
attachment hole of DVD video camera/
recorder.

Push the both sides of cap inward and attach
it over the lens.

Note

• Always keep the lens cap on when not using the DVD

video camera/recorder, to protect the lens.

• When recording, attach the lens cap to the hand strap

by hooking the tab inside the cap onto strap for
comfortable shooting.

INSERTING BATTERY INTO REMOTE CONTROL

Insert the provided lithium battery into remote control.

While inserting a fine rod into the hole
marked PUSH, pull the battery holder out
forward.

Insert the lithium battery with the positive

terminal facing down.

Slide the cover to close it.

Note

The life of lithium battery is approximately one year. If
the battery is discharged, no operation is possible with
remote control: Replace the battery.

Shorter end

Longer end

Push and fit

Battery holder

Summary of Contents for BX35A - DZ Camcorder - 680 KP







































































































































































Search results

Summary of Contents for BX35A - DZ Camcorder - 680 KP

Reviews:

Related manuals for BX35A - DZ Camcorder - 680 KP

Brands by name

Popular brands

Hitachi BX35A - DZ Camcorder - 680 KP, Instruction Manual

Search results

Summary of Contents for BX35A - DZ Camcorder - 680 KP

Reviews:

Related manuals for BX35A - DZ Camcorder - 680 KP

Brands by name

Popular brands