Hitachi BD-D100GV, Instruction Manual

Page: 17 / 72

17
7
Time Dry button
Enables timed drying setting from 30 minutes to 2 hours. While you press this button,
drying time and the
symbol is shown on the display. If display show nothing,
it mean that drying time is automatic.
* When you want to use this function, you must set the operation mode to Wash/Dry
mode or Dry mode.
8 Spin button
Enables spin speed setting from No Spin(No) to a maximum speed of 1600 rpm.
● No spin(No): Spin is cancelled, and the water is drained out only.
Recommended for delicate fabrics.
9
Water Temp. button
Enables temperature setting from cold up to 90ºC. When you select cold, the (Cold)
symbol is shown on the display and the heater switches off.
10 Memory button
Allows you to store a customized wash cycle which you use frequently. The
symbol is shown on the display.
11
Auto Self Clean button
Automatically cleans the outside of the tub and the inside of the outer tub to keep
the washer dryer clean. The setting is switched off at the time of shipment from the
factory. Once it is switched on, the
symbol is shown on the display. And the
Auto Self Clean function operates every time you do your laundry.
12
LED Multifunction display
Displays all cycle information, remaining time and error codes.
A
Door lock.
The door is locked when the symbol is on or blinks.
B
Excessive foam in the drum.
Washing time is prolonged due to the washer dryer will be pouring in extra water
to remove excessive foam.
*This is not a malfunction. Remaining time may be turned back when
The symbol is shown on the display so that operation is completed in a
longer time than the remaining time displayed at the start.
C
Imbalance in the drum.
Washing time is prolonged due to the washer dryer will be correcting imbalance
by rotating the drum.
*This is not a malfunction. Remaining time may be turned back when
The symbol is shown on the display so that operation is completed in a
longer time than the remaining time displayed at the start.
D
Timer option.
E
Child Lock option.
All buttons are disabled except the Power On/Off button and the door is locked
when the
symbol is on.
F
Prewash option.
G Rinse Hold option.
Final spin is cancelled and water is not drained, so the laundry remainsin the
last rinse water.
H
Rinse Count option.
I
Remaining time of the program (shows ‘Time Left’), remaining time until timer
operation is completed (shows ‘h’), and error codes.
(Page 69 : Error Codes)
*If the drying does not
fi nish as scheduled and the operation time is extended,
the remaining time is displayed as "10" and blink. The display will continue until
the clothes are dry and the operation will be extended.