Hitachi BD-D100GV, Instruction Manual

Page: 29 / 72

29
Control your Washer Dryer with your Smartphone
To remotely control your washer dryer from your smartphone, please follow the steps below.
If pairing has not been completed, the machine cannot be set to remote control standby.
Æ (P.63)
Put the remote control in standby
1
Operation of the washer dryer
Close the door.
Press to switch on
Wait for the communication lamp
to light up.
Please wait while the light is fl ashing as it is preparing
for communication.
Door
2
Press
Each press changes the display and allows you to make changes.
The display and sound indicate when the setting is complete.
Lights out
No setting - "Beep"
(To release the remote-control
standby state)
Lights on
With setting - "Bleep"
(To set the remote-control
standby state)
●
When the remote-control standby mode is set,
｢ 」
(Symbolic "Door lock") lights up to prevent the door
or lid from being opened and the door or lid is locked.
●
When the communication lamp is fl ashing, the remote-control standby mode cannot be set because
communication is being prepared.
●
The remote-control standby mode is automatically released when the power is switched off or the
operation is
fi nished.
●
When the remote-control standby mode is set, the power is automatically turned off after 23 hours of
inactivity.