28
How to Install the Washing Machine
n
Make sure that the union nut between the water supply hose and main unit is tightly screwed.
n
Turn the tap on to check if the water supply hose is properly connected before starting. If it is loosely
connected, water leakage may occur.
●
Drain hose
n
The drain hose should be placed higher than 60 cm above and not higher than 100 cm above the
fl
oor.
If the drain outlet is lower than 60 cm, a joint pipe is necessary
(additional part, sold at a specialist outlet). Secure the drain
hose to prevent from slipping out from joint pipe.
Joint pipe
60~100 cm
n
Do not bend, twist, crush or pull out, bend or step on the drain hose. Use the hose guide to prevent the
drain hose from kinking.
n
Do not detach the drain hose from the rear panel of the washing machine.
Drainage into a wash basin (Using the packed-in hose guide) :
– Secure the drain hose to prevent it from slipping out of the wash
basin.
– The wash basin outlet must not be sealed by a plug.
– When water is being pumped out of the washing machine, check that
the water drains away quickly enough.
Drainage into a siphon :
– Secure the connection point with 24-40 mm
φ
hose clip (Sold at a
specialist outlet).
Summary of Contents for BD-80XFV
Page 2: ...2 Memo ...
