22
Problem
Possible Cause
Solution
Rinsing begins
before spinning
fi
nishes.
●
If there is imbalance in the drum,
rinsing restarts automatically to
correct it for safety reasons.
●
This is not a malfunction.
The drum stops
and rotates
repeatedly during
spin.
●
If there is imbalance in the drum,
the washing machine tries to
correct the imbalance by repeatedly
rotating and stopping.
●
This is not a malfunction.
Spin cycle
repeatedly starts
and stops.
●
Intermittent spinning of the tub
helps the spin process to operate
quietly.
●
The laundry may be too light.
●
Add one or two bath towels to the
drum.
Foam remains on
the door or the
door seal.
●
You may have used too much
detergent.
●
Laundry is new or not that soiled.
●
Use the appropriate amount of
detergent.
Fabric softener
over
fl
ows.
●
You may have exceeded the max.
level of softener in the detergent
dispenser .
●
Do not pour in more than the max.
level of softener.
Fabric softener
remains.
●
The softener cover may have come
out.
●
Firmly set the softener cover on the
detergent dispenser.
There’s detergent
powder residue
in the detergent
dispenser.
●
You may have used too much
detergent.
●
You may have poured detergent
in the detergent dispenser when
it was wet. Wipe the water away
before adding detergent.
●
Use the appropriate amount of
detergent.
●
Wipe the water away before adding
detergent.
The washing
machine switches
o
ff
during
operation.
●
There may be noise from other
electrical appliances nearby such
as a TV, a radio, etc.
●
The motor may be locked due to
overload, the clothes being trapped
in the rubber seal, etc.
●
Unplug the power cord and plug
in again. Then select a program
and start. Do not place electrical
appliances close to the washing
machine.
●
This is not a malfunction. Wait for
about one hour and restart the
program.
Odor in the
washing machine
●
Rubber parts may give o
ff
a smell
when you
fi
rst start using the
washing machine.
●
There may be mold, dirt or
detergent residue on the drum.
●
The smell goes away over time.
●
Run the Tub Clean program.
Unsatisfactory
washing results
●
You may have used too little
detergent.
●
You may have poured detergent
directly into the drum.
●
Use the appropriate amount of
detergent.
●
Pour detergent in the appropriate
dispenser.
Troubleshooting
Summary of Contents for BD-80XFV
Page 2: ...2 Memo ...
