![Hitachi BD-80XFV Instruction Manual Download Page 27](http://html.mh-extra.com/html/hitachi/bd-80xfv/bd-80xfv_instruction-manual_147280027.webp)
27
How to Install the Washing Machine
Connecting the water supply
●
Water supply hose
n
Optimum water pressure is 0.03-0.8MPa.
n
Do not connect to the mixer tap of an unpressurised hot-water apparatus.
n
Use a horizontal tap.
Horizontal tap
Extension tap
Square tap
Connect the water supply hose to the rear panel of the washing machine.
Make sure that the rubber seal is inside the hose connector.
Rubber seal
Hose connector
* Model with SCREW TYPE water supply hose.
Firmly connect the water supply hose to the tap, and check connection points for
water-tightness.
* Model with ONE TOUCH JOINT water supply hose.
1.
Untighten the upper connector screw.
Upper connector Rubber packing
Fixing screw
Middle
connector
●
In case the diameter of the tap is large,
remove the guide plate.
Guide plate
Connector
2.
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
Rubber packing
Upper connector
Middle connector
●
Turn the middle connector so that there is no
water leak.
3.
Connect the water supply hose to the
middle connector, pushing the plate down.
Middle connector
Water supply hose
●
To separate the water supply hose from the
middle connector, turn o
ff
the tap, and then pull
the inlet hose down, pushing the plate down.
min. 10 mm
Summary of Contents for BD-80XFV
Page 2: ...2 Memo ...