This instruction manual explains the basic instructions for operating this unit. Unless otherwise stated, all
operations described are based on remote control use.
General Operation
Standby / ON
rst connect the unit to the mains socket, the unit will be in
Standby
mode.
During
Standby
mode, the
POWER
. Press
on the unit or on the remote control to switch the unit on. The display will show
“
WELCOME
x on level 15 after
every time the unit is switched on.
After the unit is idle for about 10 seconds, the display will show “
--
“.Press any button
(except and
MUTE
) to exit the idle mode.
Press on the unit or on the remote control again to switch the unit back to
Standby
mode. The display will show “
GOODBYE
.
Alternatively,
press
AUX
on the remote control repeatedly to select between
AUX 1
and
AUX 2
mode.
press
DIGITAL
on the remote control repeatedly to select between
OPTICAL
and
COAXIAL
mode.
press
HDMI
on the remote control repeatedly to select between
HDMI 1
,
HDMI 2
and
ARC
mode.
Press
PAIR
on the remote control to select
BT
(
Bluetooth®
) mode directly.
completely, remove the mains plug from the mains socket.
completely to save energy when not in use.
Selecting Modes
Press
SOURCE
on the unit repeatedly to select between
AUX 1
,
AUX 2
,
BT
(
Bluetooth®
),
OPTICAL
,
COAXIAL
,
HDMI 1
,
HDMI 2
, and
ARC
mode.
Function
The unit automatically turns to
Standby
mode after about 10 minutes if the TV or the
or the volume is too close to mute.
20
