Pairing the Wireless Subwoofer with the Soundbar
Automatic Pairing
Plug the soundbar and the subwoofer into the mains sockets and switch on the subwoofer.
Press on the unit or on the remote control to switch the unit to
On
mode. The display will
show “
WELCOME
”. Then the subwoofer and soundbar will automatically paired within 30
seconds.
After connecting the power, you must press
PAIR
ective.
The subwoofer should be within 5 m of the soundbar in an open area.
ict or strong interference (for example,
icts or strong
interferences and repeat the above procedures.
Manual Pairing
Do not press
PAIR
on the rear of the subwoofer, except for manual pairing.
It is very abnormal that the connection would fail. You should not attempt manual pairing in normal
usage.
If the automatic pairing fails or the subwoofer is switched
OFF
ash “
CHK
SUB
” for 20 seconds. Ensure that all the cables are well connected, the main unit and the
subwoofer is switched to
On
mode. If it still doesn’t work, pair the subwoofer with the
soundbar manually.
1. Unplug both units from the mains sockets, then plug them in again after 3 minutes.
2. Press on the unit or on remote control to switch the unit on.
3. Press and hold the
PAIR
button on the rear of the subwoofer, and then press and hold
SOURCE
and
VOL+
on the unit for a few seconds to start pairing. The pair indicator on
the subwoofer will rapidly blink when pairing and will become solid when successful.
4. While the unit is pairing with the subwoofer, “
CNCT SUB
ash on the display.
5. After the subwoofer is paired with the unit, “
CNCT SUB
“ will disappear, and the display
will show the current channel.
19
