Preparing the storage system
Before you begin
Confirm that the Windows-based management console has an Internet connection and an
installed version of one of the following web browsers: Internet Explorer version 11 or later,
Chrome, or Firefox.
Procedure
1.
Connect the management ports on controller 1 and controller 2 to a management (non-
production) network.
2.
Configure the management console to use an IP address of 192.168.0.18 and a subnet
mask of 255.255.255.0.
Next steps
Change the storage system's default password.
Changing the password
Procedure
1.
On your management console PC or laptop, open a web browser and enter the
following IP address:
192.168.0.16
2.
Enter the default user name and the password sent with the system, and then press the
Enter key to log in to Hitachi Storage Advisor Embedded. Contact customer support for
the default user name and password if missing.
If the login window does not appear, check whether the browser is configured to allow
pop-ups. If pop-ups are allowed, make sure the management console IP address is set
to 192.168.0.18 and the subnet mask is set to 255.255.255.0. If the IP address and
subnet mask are correct and pop-ups are allowed, but the login window does not
appear, contact customer support.
3.
In the top-right corner, click the gear icon, and then select
User Administration
.
4.
Click
Support Personnel Group
.
Preparing the storage system
Installing your storage system
Hitachi Virtual Storage Platform E990 Installation Guide
17
