Hitachi 50V500 - UltraVision Digital - 50" Rear Projection TV Operating Manual Download | Manualshive

Page: 6 / 84

background image

HOOK-UP CABLES AND CONNECTORS

6

ANTENNA CONNECTIONS TO REAR JACK PANEL

VHF (75-Ohm) antenna/CATV (Cable TV)
When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV
coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna or
cable TV system, connect the coaxial cable to the ANT B terminal.

VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or
UHF antenna leads to screws of the VHF or UHF adapter. Plug the adapter into
the antenna terminal on the TV.

When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect
the cables to the antenna mixer. Consult your dealer or service store for the
antenna mixer.

To outdoor antenna
or CATV cable

To second antenna
or cable system

To outdoor VHF
or UHF antenna

From UHF antenna

ANT A/ANT B

From outdoor
antenna or
CATV System

Antenna Mixer

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors.
For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable.

300-Ohm Twin Lead Connector
This outdoor antenna cable must be connected to an antenna
adapter (300-Ohm to 75-Ohm).

Phono Connector
Used on all standard video and audio cables which connect to
inputs and outputs located on the television’s rear jack panel
and front control panel.

“F” Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the antenna
jack on the television.

S-Video (Super Video) Connector
This connector is used on camcorders, VCRs and laser- disc
players with an S-Video feature in place of the
standard video cable to produce a high quality picture.

IR Mouse Cable (Provided)
Connect the IR Mouse Cable to the IR BLASTER output of your
TV when using the A/V Network feature. You must place the IR
mouse transmitter in front of the IR sensor of your external
components. This connection allows your TV to control your
external components without using your external component’s
remote control.

Digital Visual Interface (DVI) Connection Cable
This cable is used to connect external devices with DVI-HDTV
output capability.

FIRST TIME USE

«
...
4
5
6
7
8
...
»

Summary of Contents for 50V500 - UltraVision Digital - 50" Rear Projection TV





















































































Reviews:

No comments

Related manuals for 50V500 - UltraVision Digital - 50" Rear Projection TV

Brand: Samsung Pages: 203

32/123J-GB-3B2-HCDU-UK

Brand: Blaupunkt Pages: 26

SENTRY 2 SLS9550S

Brand: Zenith Pages: 30

Brand: RCA Pages: 41

Brand: Kogan Pages: 34

Brand: Lloyd Pages: 5

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 44

Brand: Samsung Pages: 159

LE32A55 P Series

Brand: Samsung Pages: 241

Brand: Samsung Pages: 181

Brand: JVC Pages: 157

LT-52X579 - 52" LCD TV

Brand: JVC Pages: 16

Brand: RCA Victor Pages: 32

Brand: Samsung Pages: 4

Brand: Samsung Pages: 6

Brand: Samsung Pages: 6

Brand: Samsung Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands