Hitachi 42HDT51M, Service Manual

Page: 46 / 131

46
PT5-G/PW1-H
ACRS1 ACR PLL hardware value 1 (Refer to Source) _ _ 3F -
_ _
SFREQ1
Extracted Sampling Frequency 1
channel status b24-27(same value at 0x30)
_ _ 0F -
_ _
CLKFRQ1 Clock Accuracy/Sampling Frequency 1 _ _ FF -
_ _
ALNG1 Audio length/Audio length max 1 _ _ FF -
_ _
MT_MD1 AV mute/HDMI mode 1 _ _ FF -
_ _
VTYP1 AVI infoframe type code 1_Request_ _ _ FF -
_ _
VVER1 AVI infoframe version code 1_Request_ _ _ FF -
_ _
VINFO11 AVI infoframe data 1 _ _ FF -
_ _
VINFO21 _ _ _ FF -
_ _
VINFO31 _ _ _ FF -
_ _
VINFO41 _ _ _ FF -
_ _
VINFO51 _ _ _ FF -
_ _
ATYP1 AUDIO InfoFrame Type Code 1_Request_ _ _ FF -
_ _
AVER1 AUDIO InfoFrame Version Code 1_Request_ _ _ FF -
_ _
AINFO11 AUDIO InfoFrame Data Bytes 1 _ _ FF -
_ _
AINFO21 _ _ _ FF -
_ _
AINFO31 _ _ _ FF -
_ _
AINFO41 _ _ _ FF -
_ _
AINFO51 _ _ _ FF -
_ _
SYNC2 VSYNC/Clock detect/Sync detect 2 _ _ 07 -
_ _
NHRDL2 N hardware value 2 Low 7 bit _ _ FF -
_ _
NHRDM2 N hardware value 2 Mid 7 bit _ _ FF -
_ _
NHRDH2 N hardware value 2 High 4 bit _ _ FF -
_ _
CHRDL2 CTS hardware value 2 Low 7 bit _ _ FF -
_ _
CHRDM2 CTS hardware value 2 Mid 7 bit _ _ FF -
_ _
CHRDH2 CTS hardware value 2 High 4 bit _ _ FF -
_ _
ACR2 ACR PLL hardware value 2 _ _ FF -
_ _
ACRS2 ACR PLL hardware value 2 (Refer to Source) _ _ 3F -
_ _
SFREQ2
Extracted Sampling Frequency 2
channel status b24-27(same value at 0x30)
_ _ 0F -
_ _
CLKFRQ2 Clock Accuracy/Sampling Frequency 2 _ _ FF -
_ _
ALNG2 Audio length/Audio length max 2 _ _ FF -
_ _
MT_MD2 AV mute/HDMI mode 2 _ _ FF -
_ _
VTYP2 AVI infoframe type code 2_Request_ _ _ FF -
_ _
VVER2 AVI infoframe version code 2_Request_ _ _ FF -
_ _
VINFO12 AVI infoframe data 2 _ _ FF -
_ _
VINFO22 _ _ _ FF -
_ _
VINFO32 _ _ _ FF -
_ _
VINFO42 _ _ _ FF -
_ _
VINFO52 _ _ _ FF -
_ _
ATYP2 AUDIO InfoFrame Type Code 2_Request_ _ _ FF -
_ _
AVER2 AUDIO InfoFrame Version Code 2_Request_ _ _ FF -
_ _
AINFO12 AUDIO InfoFrame Data Bytes 2 _ _ FF -
_ _
AINFO22 _ _ _ FF -
_ _
AINFO32 _ _ _ FF -
_ _
AINFO42 _ _ _ FF -
_ _
AINFO52 _ _ _ FF -
_ _
BPMA Back Porch Mode,Field2
VCO Range Select:
00 = low range setting (default)
01 = mid-low range setting
10 = mid-high range setting
11 = high range setting
_ 0 1 01
_
_
VCORA VCO range select
Charge Pump Current Select, when
PLL_CGC[1]=0.
000 = 50µa
001 = 100µa (default)
010 = 150µa
011 = 250µa
100 = 350µa
101 = 500µa
110 = 750µa
_ 0 3 00 _
_
CRNTA change pump current select
_
_ 0 7 00
_
_
TESTA
Matching Test to allow increment of stability
counter.
1=Previous and most recent counts must
match exactly.
0=Match determined by WINDIV value.
_ 0 1 01
_
_
PRMB preamble criteria _ _ 1F 06
_
_
10. I
2
C Adjustment Code and Data (Continued)