Hitachi 3100 Network Administration Manual Download Page 76

Page: 76 / 89

There are two additional TCP/IP statistics pages:
•

TCP/IP Statistics (per port) - Aggregation ports -

this page contains

network information on a per aggregation basis, for example, ag1, ag2...

•

TCP/IP Statistics (per port) - Physical ports

- this page contains

network information on a per physical port basis, for example, tg1, tg2...

Navigate to the

Network Configuration -> TCP/IP Statistics (per port)

page in order to view the Aggregation ports page. On this page, there is a
link to the

TCP/IP statistics (per port) - Physical ports

page.

Additional commands

The HNAS server also provides the following CLI commands which display
information on the current network health status:

•

agg

- this command lists any existing aggregations

•

ethernetstats

- this command displays statistics for each Ethernet

interface

•

tcpstats

- this command displays statistics for TCP protocol packets

•

udpstats

- this command displays statistics for UDP protocol packets

•

ip-stats-other

- this command displays statistics for all other IP protocol

packets

•

icmpstats

- this command displays statistics for ICMP protocol packets

•

icmpv6stats

- this command displays statistics for ICMP v6 protocol

packets

•

arp

- this command displays the IP to MAC address mappings

•

ndp-dump

- this command displays the IPv6 to MAC address mappings and

also displays any on-link prefixes and discovered routers

Troubleshooting

Hitachi NAS Platform Network Administration Guide

Summary of Contents for 3100


























































































Search results

Summary of Contents for 3100

Reviews:

Related manuals for 3100

Brands by name

Popular brands

Hitachi 3100, Network Administration Manual

Search results

Summary of Contents for 3100

Reviews:

Related manuals for 3100

Brands by name

Popular brands