- 6 -
5. Ventilation
The slots and openings on the back cover
are intended for ventilation and to ensure reli-
able operation. To prevent overheating,
these openings must not be blocked or cov-
ered in anyway.
6. Heat and Flames
The set should not be placed near to naked
flames and sources of intense heat, such as
an electric heater. Ensure that no naked
flame sources, such as lighted candles, are
placed on top of the set.
7. Lightning
In case of storm and lightning or when going
on holiday, disconnect the power cord from
the wall outlet.
8. Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement
parts which are specified by the manufacturer
or have the same specifications as the original
one. Unauthorised substitutions may result in
fire, electrical shock, or other hazards.
9. Servicing
Please refer all servicing to qualified person-
nel. Do not remove the cover yourself as this
may result in an electric shock.
Instructions for waste disposal:
Packaging and packaging aids are recyclable
and should principally be recycled. Packag-
ing materials, such as foil bag, must be kept
away from children.
Battery, including those which is heavy metal-
free, should not be disposed of with house-
hold waste. Please dispose of used battery in
an environmentally sound manner. Find out
about the legal regulations which apply in
your area.
The mains plug of the power supply is
used as disconnect device and therefore
shall remain readily operable.
Warning
: To prevent injury, this device must
be securely attached to the floor/wall in ac-
cordance with the installation instructions.
DO NOT LEAVE YOUR SET AT STAND-
BY OR OPERATING WHEN YOU LEAVE
YOUR HOUSE
"The LCD panel is very high technology
product with about a million thin film tran-
sistors, giving you fine picture details. Oc-
casionally, a few non-active pixels may
appear on the screen as a fixed point of
blue, green or red. Please note that this
does not affect the performance of your
product."
Cold cathode fluoresant lamp in LCD PANEL
contains a small amount of mercury, please
follow local ordinates or regulations for dis-
posal.
Securely connect
the ground wire.
Be sure to ground the connection properly.
Connect the ground terminal of the AC adaptor with the ground terminal
provided at the power outlet using the enclosed power cord. If the provided
plug does not fit your outlet, consult an electrician for replacement of the
obsolete outlet.
50091569-1-1511-ENGLISH-1551 UK-15inchPixelWorks-17MB18-(LAU)-WO PC.p65 31.07.2006, 17:33
6