Hitachi 0506E, Service Manual

Page: 6 / 41

– 3 –
CP-X960WA
CP-X970W
3. Names of each part
Main unit
RGB1 RGB2 VIDEO
• Use the remote control in front of the remote control photoreceptor at a distance
of about 5 m or less and an angle of 30 degrees to the left or right of the center.
STANDBY / ON button
Press this button to turn the power
on and off. When turned off, the
projector enters standby status.
MUTE button
This button turns the sound on and
off. Press once to turn the sound off;
then press again to turn the sound
back on.
ZOOM button
Used to adjust the size of the image.
POWER indicator
This indicator lights or blinks during
standby and during operation.
TEMP indicator
This indicator lights or blinks when the
internal temperature of the projector
rises and when the fan malfunctions.
Remote control
photoreceptor
Lens
Lens cap
Speaker
Cooling fan
(intake side)
Cooling fan
(exhaust side)
Handle
Speaker
RESET button
Used to reset the initial settings.
LAMP indicator
This lamp lights or blinks when the
lamp is off.
INPUT button
Press this button to switch the input. The
input changes in the following sequence
each time this button is pressed.
MENU button
Displays the image menu.
FOCUS button
Used to adjust the focus of the image on
the screen.
ZOOM FOCUS
MUTE INPUT
MENU
POWER TEMP LAMP
STANDBY/ON
RESET