– 7 –
CP-X960WA
CP-X970W
Message table
On-screen display
The following messages are displayed on the screen.
"CHANGE THE LAMP"
"AFTER REPLACING LAMP, RESET
THE LAMP TIMER"
Lamp has 1,700 hours on it and may need to be changed.
"CHANGE THE LAMP"
"AFTER REPLACING LAMP,
RESET THE LAMP TIMER"
"THE POWER WILL TURN OFF
AFTER 20 hr."
Lamp has 1,979 hours on it.
See P.6 "Reset the lamp timer"
Blinking of "CHANGE THE LAMP"
"AFTER REPLACING LAMP,
RESET THE LAMP TIMER"
"THE POWER WILL TURN OFF
AFTER 0 hr."
When the lamp has 2,000 hours or more on it, the message will blink, and the
power will turns off after 10 minutes.
"NO INPUT IS DETECTED"
Signal is not input.
"SYNC IS OUT OF RANGE"
The horizontal or vertical frequency of the input signal exceeds the range of
the projector, it cannot be displayed.
Summary of Contents for 0506E
