14
English
Maintenance schedule
Below you will
fi
nd some general maintenance instructions. For
further information please contact Hitachi Authorized Service
Centers.
Daily maintenance
○
Clean the exterior of the unit.
○
Check that the harness is undamaged.
○
Check the blade guard for damage or cracks. Change the guard
in case of impacts or cracks.
○
Check that the cutting attachment is properly centred, sharp,
and without cracks. An o
ff
-centre cutting attachment induces
heavy vibrations that may damage the unit.
○
Check that the cutting attachment nut is su
ffi
ciently tightened.
○
Make sure that the blade transport guard is undamaged and
that it can be securely
fi
tted.
○
Check that nuts and screws are su
ffi
ciently tightened.
○
Check that the unit is undamaged and free of defects.
Weekly maintenance
○
Check the starter, especially the cord and return spring.
○
Clean the exterior of the spark plug.
○
Remove it and check the electrode gap. Adjust it to 0.6 mm, or
change the spark plug.
○
Check that the angle gear is
fi
lled with grease up to 3/4.
○
Clean the air
fi
lter.
Monthly maintenance
○
Rinse the fuel tank with gasoline.
○
Clean the exterior of the carburetor and the space around it.
○
Clean the fan and the space around it.
List of recommended accessories
Type
Name
Speci
fi
cation
LOOP HANDLE
BIKE HANDLE
MULTI PURPOSE
Diameter
Feed System Adapter or
No. of Teeth (Blade)
Blade Thickness (mm)
or
Trimmer line Diameter (mm)
CG22EAB (L)/(LP)
CG22EAS (SL)/(SLP)
CG24EAS (SL), CG24EASP (SL)
CG27EAS (SL), CG27EASP (SL)
CG22EAS (S)/(SP)
CG24EAS (S), CG24EASP (S)
CG27EAS (S), CG27EASP (S)
CG22EAD (SL), CG22EAD (SLP)
ALUMINUM HEADS
NYLON HEAD
CH-100
(W/NYLON LINE)
4”
Pre-Cut Line
2.2
–
3.0
●
●
●
●
●
●
●
●
NYLON HEAD
CH-100
●
●
●
●
●
●
●
●
NYLON HEAD
CH-300
(W/CUTTER
HOLDER CAP)
5”
Manual line
feed
2.2
–
2.7
●
●
NYLON HEAD
CH-300
●
●
TAP & GO NYLON
HEADS
NYLON HEAD
BF-4
4”
R M8 x 1.25
Nut
2.2
–
3.0
●
NYLON HEAD
BF-5
5”
L M10 x 1.25
Nut
L M8 x 1.25
2.2
–
3.0
●
●
●
●
●
●
●
BLADES
BLADE
B3/10/2.0
10”
3
2.0
●
●
BLADE
B3/12/3.0
12”
3
3.0
●
●
BLADE
B4/9/1.6
9”
4
1.6
●
●
●
●
●
●
●
BLADE
B4/10/1.6
10”
4
1.6
●
●
●
●
●
●
000Book̲CG22EAS̲EE.indb 14
000Book̲CG22EAS̲EE.indb 14
2014/07/01 9:23:27
2014/07/01 9:23:27
