Electric Power Steering System
8-9
■
Solutions for common fault
：
1. Open the main switch, no auxiliary power of left and right steering.
S/N
FAULT PHENOMENON
FAULT POINT
SOLUTION
1
Meter
warning
fault
code:F00010
Special fuses of ECU is blown in
fuses box (see figure 1), Or ECU is
damaged
Replace fuses. Bring the
UTV to dealer for repair
2
Meter warning fault code
：
F00001&F00002
Sensor is damaged or sensor’s
connector with bad contact or ECU
is damaged
Bring the UTV to dealer for
repair
3
Meter warning fault code
：
F00005
Low voltage in storage battery
Charge
storage
battery,
replace it if necessary.
4
Meter warning fault code
：
F00003
Motor is damaged or driving circuit
in motor is damaged or power
motor special fuses are blown.
Replace fuses, Bring the
UTV to dealer for repair
5
No electrical power
connected
Main fuses melted.
Replace fuses
6
No meter alarm, UTV can
electrify
ECU
initialization
choose
pin
connector with poor contact (sees
attached figure 2), or in the wire
cable is disconnect
Reinsert
well,
replace
connector or repair cables.
7
No meter alarm
ECU is damaged
Bring the UTV to dealer for
repair.
Figure 1
：
Fuses box
①
ECU dedicated fuse
Figure 2
：
ECU initialization connector’s position
①
ECU initialization connector
